Zealyen Info offers practical tutorials, coding guides, and MCU projects. Learn STM32, Arduino, ESP32, TI boards, C/C++, Python, and electronics with real implementations.
In our recent project, we faced a very common but tricky issue — we had a PWM signal coming from a 3.3V microcontroller (STM32), but our motor driver and few industrial sensors required a full 5V PWM input. Direct connection worked, but the motor was just running at half speed. At first, we thought it…
Getting PWM to Work on my TI SimpleLink Board (CC13xx) So I finally got PWM working on my TI SimpleLink MCU, when I first started, I kept seeing “PWM” all over the datasheets and motor control examples, and to be honest, it was a bit confusing? Like, I knew it was for controlling stuff like…
When we are working with TI MCUs like CC1354P10, CC1310 or any LaunchPad series, the first thing we do after setting up the project is make the LED blink, it just to confirm that everything is working fine.But after that, we want to see something more on the serial terminal, right? That’s where UART debugging…
In embedded systems and the industrial automations, RS485 communication is one of the most standardised protocol are used due to its ability to handle long-distance communication through wired and supports multiple devices (master/slave) on a single bus. If you are looking to integrate RS485 into your project with a Texas Instruments (TI) microcontroller like CC1310,…
If you’ve worked with the TI-RTOS (SYS/BIOS), you probably used Task_sleep() function for delays. It works fine on LaunchPads… until you move to a custom board. Suddenly, Task_sleep() does not behave correctly your delays are off (Time delays not working), the system doesn’t respond at all and the board will reset loop with watchdog reset….
Digital-to-Analog Converters (DACs) play a major role in the embedded systems by translating digital values into analog voltages. To interface the DAC8551 (TI) using SPI on a TI microcontroller platform, leveraging TI’s driver libraries for clean and modular code. It can be used to modulate the output voltage via a program through the SPI interface…
